LaserWell: FAQs

Following is a list of the most commonly asked questions regarding LaserWell laser printable membership identification cards. 

Q. What is LaserWell?

A. LaserWell membership identification card documents are a combination of materials providing the ultimate solution for desktop laser printers. The patented LaserWell construction affixes a unique toner receptive card to laser compatible document. These documents can be fed as single sheets or from your normal paper tray.

Q. How flexible can my customer be in card placement on the LaserWell form?

A. While most of our customers use standard LaserWell formats, custom card positioning is available provided the card is affixed no closer than 1/2 inch from the edge. However, all formats must be tested to insure compatibility between particular laser printer and LaserWell format.

Q. What is the maximum number of cards that can be affixed to a single LaserWell form?

A. LaserWell membership identification cards can be configured with one, two, three, or six cards. Six up being the maximum. .

Q. Can both sides of the LaserWell card and form be printed prior to affixing?

A. Yes, preprinting is available on the front and back of both the card and the form.

Q. Can both the front and backside of the LaserWell card and form be imaged after affixing?

A. Yes, utilizing the WindoWell™ version of LaserWell allows customers to duplex laser print both the form and the card. WindoWell™ documents are available in the 1up and 2up and 3up standard formats.

Q. Is four color processing available for LaserWell products?

A. Yes, line colors and four color processing are available for both LaserWell card and form.

Q. Can a card and a label be affixed to the same LaserWell sheet?

A. Yes, a label may be affixed to the LaserWell document along with a card. However, these special constructions need careful review and testing prior to manufacturing.

Q. How should LaserWell artwork specifications be submitted?

A. Artwork should be submitted in one of the four FormStore approved artwork formats; layout for typesetting, camera ready artwork, IBM or Mac disk or artwork negatives.

Q. Must the finished LaserWell sheet measure 8 1/2 inches by 10 7/8 inches or 13 7/8 inches?

A. Yes, the manufacturing process used to produce LaserWell dictates this finished size.

Q. Is LaserWell available as a rolodex card?

A. At this time, LaserWell is only available as a standard 3 3/8 x 2 1/8 inch card or our special TwinCard size of 3 3/8 x 4 1/4 inch.

Q. What is the typical time between order placement and order delivery?

A. Due to the complexity in the manufacturing of LaserWell, typical order delivery is four weeks after proof approval.

Q. Are shorter delivery schedules available on a premium basis?

A. Yes, rush orders can be accommodated for a premium. 

Q. What is the LaserWell minimum order?

A. The minimum order is 2,500 sheets